Electromagnetic Smart water Meter MWM-500

Electromagnetic Smart water Meter MWM-500

Electromagnetic Smart water Meter MWM-500

The MWM-500 smart meter uses the electromagnetic metering Sensor and is designed to monitor the usage of water resources according to the environmental conditions. In addition to precisely measuring the water usage, it is able to record and save all the events and information on water usage from the well. This meter is able to send its data to the metering software by connecting to the smart electricity meter and cellular networks, and receive necessary data from the metering software.

Visite 1717

Electromagnetic Smart water Meter MWM-500



Benefits

  • Complete water consumption management
  • Remote meter reading via smart electricity meter


Features

  • Internal power supply with long durability
  • Resistant against climate change
  • Precise and correct performance at any climate situation
  • Possible electrical valve addition
  • With optical probe for local settings application and data extraction
  • Remote metering software bundle
  • Meter configuration software bundle for applying settings to the meter locally
  • Without any mechanical moving parts
  • Water flow direction measurement and empty pipe detection
  • Mifare card reader system, with possibility to transfer data to the card
  • Water usage amount charge ability by user via mifare card


General Specifications

  • Power supply:
    • Diesel and Electrical
    • Battery life calculation algorithm according to the consumption flow and empty battery alarm
  • Ports:
    • Consumption output pulse
    • Optical port for data transmission compliant with IEC 62056-21
    • M-BUS
  • Measuring Accuracy: 2%
  • Protection Degree: IP67 Sensor, IP54 Electrical
  • Connection type: Flange
  • Material:
    • Body: Carbon Steel with Painting Coating
    • Electrodes: AISI 316L
    • Lining: EPDM, Hard Rubber, PTFE
    • Flange: Carbon Steel/DIN2576, DIN2577, DIN2578, ANSI
  • Size: 1 - 56 inches


System Architecture

Electromagnetic Smart water Meter MWM-500


Capabilities

  • Events Record: recording and sending of a variety of events, alarms and tamperings
  • Consumption Profile: Consumption profile recording (volume & flow) with time intervals from 30, 60, 90 and 120 minutes
  • Recordable and Measurable Parameters in the System:
    • Momentary flow (L/s)
    • Maximum flow (L/s)
    • Authorized volume of consumption (m3, 0.00)
    • Total volume consumed (m3, 0.00)
    • Total remaining volume (m3)
    • Pump usage time
    • optical port status
    • OBIS codes display possibility
    • Power outage or connection status display
    • Reverse flow display
    • Battery status
    • Water consumption limit indicator
    • Tampering Indicator


Functions

Passing FlowVolumem3, L
Reverse FlowVolumem3, L
Adjustable Pulse Ratio1, 10 ,100 ,1000L/Pulse
Maximum readable number8 numerical and 2 decimal digitsmin


Panel

Electromagnetic Smart water Meter MWM-500

  1. Screw Cap
  2. LCD
  3. Data logger specifications
  4. Optical probe location
  5. LEDs of Meter
  6. LEDs of MBUS
  7. Mifare Card Location
  8. LEDs of GPRS
  9. Gland Markers


Meter Standards

  • Water Meter Approvals: ISO16399 / OIML R49
  • Electromagnetic Capability: EN61326-1:2006
  • Low Voltage Directive: EN61010:2001


Ordering

ItemCodeDescription
Integrated mountM1Mounting Type
Remote mountM2
1inch (DN25)S1Size
1.5inch (DN40)S1½
2inch (DN50)S2
3inch (DN80)S3
4inch (DN100)S4
5inch (DN125)S5
6inch (DN150)S6
8inch (DN200)S8
10inch (DN250)S10
12inch (DN300)S12
14inch (DN350)S14
16inch (DN400)S16
18inch (DN450)S18
20inch (DN500)S20
24inch (DN600)S24
40inch (DN1000)S40
48inch (DN1200)S48
56inch (DN1400)S56
Other Sizes*SN
Flange UNI2277, DIN2576PN10Operation Pressure
Flange UNI2278, DIN2577PN16
Flange UNI6083, DIN2578PN25
ANSIPNA
Other Flange Type*PNO
EPDML1Liner Material
Hard RubberL2
PTFEL3
PFAL4
Other Material*L5
SS:316LE1Electrodes Material
Alloy CE2
Gold / PlatinumE3
TantalumE4
Platinum / RhodiumE5
Other Material*E6
(Tow) 2N2Number of Electrodes
(Three) 3N3
(Four) 4N4
DIN FlangeF1End Flange
ASME FlangeF2
110/220VACVHVoltage
24VDCVL
4-20mAIO1Output, Input
Modbus RS-485IO2
EthernetIO3
Pulse outputIO4
RelayIO5

*According to the customer's order

Example for product ordering code:

  • MWM-500-M1-S3-PN16-L2-E1-N2-F1-VH-IO5