Data Concentrator Unit DCU-410

Data Concentrator Unit DCU-410

Data Concentrator Unit DCU-410

DCU410

This device is installed beside meters in distribution substations. It communicates with meters using the meter communication ports and on the other hand connects to the central server and the software using GPRS, LAN or PSTN, receiving instructions and executing them and therefor sending read data from meters to the server.

Visite 1085

AMR Features

  • Complete database development of load profile and other meter parameters
  • Load amount prediction due to data collected in the database
  • Grid waste detection ability
  • Load peak time and measure detection ability
  • Meter performance validation through input and output data comparison
  • Increased reading speed and accuracy due to human error factor
  • Online monitoring of meters in distribution substations
  • Power quality increase due to grid parameters reading

Specifications

  • Intelligent processor for processing instructions offline
  • Connection establishment with variety of digital meters in distribution substations
  • RS-232 communication port
  • Two individual RS-485 ports and connect multiple meters to one device through RS-485 bus
  • Three isolated digital input
  • An analogue 0 to 5 volts input
  • A current input of 4 to 20 mA
  • Two isolated digital output
  • Latch relay to set and reset
  • Optical port for local usage
  • Comply with EMC standard
  • IP52 standard certified
  • Remote firmware upgrade and device usability change
  • Remote recharge and reading of SIM credit
  • Internal RTC, back-up battery and internal flash memory
  • Internal power source
  • Dual custom communication mode (GPRS-LAN , PSTN-GPRS)
  • Reading of different meter parameters as such grid parameters, consumption value and load profile 1 and 2
  • Remote device parameters configuration
  • External antenna installation capability
  • Automated remote reading of meter parameters (minimum 1 minute)
  • Single communication module ordering available (LAN, GPRS or PSTN)
  • Works in transparent mode in order connect to meter firmware
  • Comply with various communication protocols (Modbus: command line, IEC62056-21, DLMS)

LAN Module Specifications

  • Ethernet 10Base-T or 100BAse-TX (Auto-Sensing)
  • Access Restriction : IP and MAC address filtering, Password
  • Security Protocols : SSL3.0/TLS1.0, SSH2.0
  • 4 Communication Modes (TCP server, TCP client, AT Command and UDP)
  • Variety of monitoring status(debugging mode, Telnet)
  • DHCP and PPoE
  • DNS (easy access using domain name)
  • DDNS (dynamic IP address management by domain name)
  • IP Change Notification for dynamic IP address management (TCP, UDP, and DDNS)
  • Telnet COM Port Control Option (RFC 2217)

·

  • Data transfer at rates from 300 bps to 56 Kbps
  • Control and configuration via AT commands
  • V.42 error control and V.42bis data compression
  • Shared line features prevent modem operation from interfering with voice communications
  • Complete integrated DAA
  • World-wide telephone networks compliance
  • UL60950 Recognition

·

  • Quad-Band: GSM 850, EGSM 900,DCS1800,PCS 1900
  • Compliant to GSM phase 2/2+
  • GPRS Multi-slot class   10/8
  • Support SIM card :1.8 V ,3 V
  • Power consumption : Less than 5VA

·

General Specifications

Power Source 110 AC / 80-150 DC
Or 100 – 240 AC (order dependent)
Storage temperature -30 to +70 degree Celsius
Operation Temperature -25 to +65 degree Celsius
Weight 556 gr
Dimensions 11x16x6 cm
Humidity Range Up to 95%