Data collector
Electricity Meter Data Collector DCU-250
3/13/2023
The data collector is installed next to the digital electricity meters and communicates with them using the communication ports of the meters. If the installed meters have an RS485 electrical port, by using networking between the meters, by placing the DCU-250 device next to them, the meters can be collectively read in order and their information can be saved in a certain period of time. Using the SIM card in the device, it is connected to the mobile network through the GSM platform and communicates with the central server and remote reading software through SMS and GPRS, and through the software, the required commands are sent to the modem and the modem information. It sends its saved data to the software. This collected information can be used in energy consumption management.
Data Concentrator Unit DCU-1000
1/20/2018
DCU1000
Data Concentrator Unit DCU-411
1/21/2018
DCU411
This device is installed alongside the meters in the above-mentioned substations and communicates with the communication ports of the meters, and on the other hand, using the GPRS substrate or one of the PSTN and LAN platforms with the central server and the software. Communicates, receives commands from the software, and takes the necessary steps and, if necessary, sends read data from the meters. The product meets the network management company's instructions and procedures for reading feeder feeder readings for distribution companies.
Data Concentrator Unit DCU-410
1/21/2018
DCU410
This device is installed beside meters in distribution substations. It communicates with meters using the meter communication ports and on the other hand connects to the central server and the software using GPRS, LAN or PSTN, receiving instructions and executing them and therefor sending read data from meters to the server.
All rights belong to assess the SanjeshAfzarAsia .