Electricity Meter Remote Reader AMU-310

Electricity Meter Remote Reader AMU-310

Electricity Meter Remote Reader AMU-310

AMU-310

Remote Meter Reading System

This device is installed beside digital electricity meters and connects to the meter using meter communication ports. It communicates with data center or MDM software using the internal SIM card through SMS and GPRS network. Given instructions from the software, executes necessary actions and in case of need transfers the read data.

Visite 728

Main Features

  • Grid power loss recognition
  • Recognition and registration of meter tampering date, and reporting to the server.
  • Improvement of Billing System
  • Cost reduction of meter reading and power cut out/contact.
  • Exclusion of impossible meter readings including unavailability...etc.
  • Increase of accuracy and speed in billing due to omitting human error.
  • Power Presale possibility.
  • Power Outage/Cut alarm.
  • User meter data accessibility for changing the consumption pattern.
  • Demand control through sending cost rates to users and encouraging reduced consumption.
  • Improvement of power quality monitoring due to measurement of power rate and harmonic variables.

Specifications

  • Intelligent processor for executing instructions online.
  • Ability to communicate with all digital meters.
  • DBO, CLO, RS-232, RS-486 communication ports.
  • Ability to connect up to 5 meters through RS-485 bus (upgradable up to 30 meters capability)
  • Meter data reading according to DLMS and IEC-62056 protocols.
  • Two different isolated digital inputs (upgradable up to 4).
  • One analogue 0-5 volts input (upgradable up to 2).
  • Two different isolated digital outputs (upgradable to 4).
  • A relay for connecting and disconnecting (upgradable to 2).
  • Optical port for data deployment in case GPRS network is not available (if requested).
  • Having specified standards of industry tools (EMC, Watch dog, ...)
  • Upgrading firmware or device use change through sending file from afar.
  • Ability to show the remaining simcard charge and ability to recharge through software.
  • Internal power source and AC power usage capability.
  • Simultaneous SMS and GPRS connectivity.
  • Ability to send the meter registry data through SMS in case of GPRS network loss.
  • Ability to read various meter data including: Power Quality, Log File, Load Profile, Register.
  • Ability to change device settings through SMS/GPRS.
  • External Antenna installation capability (if requested).
  • Ability to create virtual Load Profile for meters lacking this ability (if requested).
  • Ability to monitor various parameters offline and send different alerts (if requested).
  • Internal RTC, back up battery, internal storage.

Verification Standard

  • IEC61000-4-4 (EFT)
  • IEC61000-4-2 (ESD)
  • IEC61000-4 (Electromagnetic Compatibility)
  • IEC61000-4-5 (Surge Immunity)

Technical Specifications

  • Quad-Band: GSM 850, EGSM 900, DCS 1800, PCS 1900 Compliant to GSM phase 2/2+
  • GPRS Multi-slot class   10/8
  • GPRS mobile station class B
  • Support SIM card: 1.8 V, 3 V
  • Power consumption: Less than 5VA

General Specifications

Power consumption 90 - 230 volts
Operating temperature range -25 oc to +65 oc
Storage temperature range -30 oc to +70 oc
Device weight 556 gr
Dimensions 11x16x6 cm
Operating humidity range 0-95%