Single-Phase electricity Meter Tester And Inspection MT-141
Single-Phase electricity Meter Tester And Inspection MT-141
MT141
MT141 is a portable device made for test and inspection of single phase consumer measurement devices. this device is designed by the test and inspection standards of national distribution companies and is able to test various digital and mechanical single phase meters.
Visite 657
Catalogue
Main Features
- Complete isolation of digital section from power measurment section
- Equiped with protection circuits to prevent probable shocks and user faults due to wrong electronic connections
- Protection against excess current due to short circuit in attachable accessories
- Digital pulse counter attachment capability
- Meter data reading through optical port capability
- File access level restrictions and valid working hours time definition for meter readers
- Battery replacement with no need or opening the device
- Intelligent charging system for controlling the charging process
- Geophraphical location entry using GPS (if requested)
- Capable of registering all observations and measuring device specifications
- Testing of digital and mechanical single phase and straight three phase meters
Specifications
| Registered and shown Parameters | Voltage, Current, phase difference, visual power, active power, reactive power, frequency and temperature |
| Power Source | Ni-MH 3500mAh |
| Communication Ports | USB, RS232 |
| Information registry capacity | 1600 to 4800 consumers |
| Measured voltage | Maximum 400 v |
| Measured current | 0.1 - 200 A |
| Working frequency | 50 Hz |
| Measurable power factor | -1 to +1 |
| Optimal working range | -10 to +55 |
| Diameters | 22x11x4 cm |
| Weight | 540 gr |
| GPS Module | GPS L1 , 1575.42 MHz band frequency Glonass L1 1598.0652 ~ 1605.375 MHz first start less than 35 s channel count 99 accuracy 2.-20m |
Accessories
- Current Clamp x1
- Voltage probe x2
- Bag
- Cover
- Charger
- Serial Cable
- USB Cable
All rights belong to assess the SanjeshAfzarAsia .